Flocculant Polyacrylamide Coagulant

Product Description

To meet the diverse requirements of our valued clients, we are betrothed in offering superior grade Flocculant Polyacrylamide Coagulant. Known to increase the viscosity of water, this product has improved adhesive property and penetrability. Owing to its balanced formulation and exact pH value, the provided product is widely demanded in water treatment, textile, paper, sugar and other related industries. This Flocculant Polyacrylamide Coagulant is available in various air-tight packaging options.

Key points:

• It can be sprayed on deserts to prevent solidification of sand
• Improves effectiveness of water
• Highly soluble in water
• Better flocculation
  

Features:

What's Blufloc Polyacrylamide?

Application Fields:

  Advantages of Blufloc Polyacrylamide:

How to Use Polyacrylamide?

Application and Dosage:

The dosage range of varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage. 

Jar Test: 

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution. 

Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. 

Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank. 

Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration, and then dilute the flocculant mixture immediately before use. 

Handling measures and precautions:

Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.